PDA

View Full Version : Clutch help needed

mike
16-08-04, 08:13 PM
On the way to work this morning my clutch went all weird. Play in the peddle was down to the half way point with no resistance at all - towards the end of the day the pedal was stuck to the floor and all i needed to do to clutch was tap the pedal!.

Got home and checked the clutch resevoir and it was bone dry - i filled it up and primed with the pump on top of the resevoir - clutch is back to how it was this morning - with play down to half way.

Any suggestions what to do next - do I need to bleed the system - if so how or does the pedal need adjusting

All help would be appreciated

Cheers Guys :banghead: :crybaby: :notworthy
gtstarga
16-08-04, 08:16 PM
Have a lokk in the drivers footwell if it is greasy then the clutch master cylinder thingy has gone.
mike
16-08-04, 09:21 PM
Yes it is greasy - there is a huge stain on the carpet when I bought it - was aware of this - is there a repair kit or is it a new cylinder - if so how much to repair/replace - is it an easy diy job or pro ?

Cheers
gtstarga
16-08-04, 10:21 PM
Yes it is greasy - there is a huge stain on the carpet when I bought it - was aware of this - is there a repair kit or is it a new cylinder - if so how much to repair/replace - is it an easy diy job or pro ?

Cheers

Not cheap but let me see if i got one! I have more spares than Toyta at the mo....lol
mike
16-08-04, 10:26 PM
Thanks I would really appreciate that - £60 from fensport ! - Just looked at the workshop manual - looks an ok job to do - about a days work I reckon

:banghead: Doh! - I've just jinxed it now - its probably gonna take a whole weekend.

Would you be able to let me know asap please :cheeky: as i need to get it done this weekend as we are at trax and i dont want to leave it till last minute

Thanks very much for your help

:notworthy
gtstarga
16-08-04, 10:43 PM
Will see if i have one tommorow. Don't worry if you need to prompt me as I have so many parts flying about at the mo! :banghead:
TurboChick
20-08-04, 03:02 PM
Will see if i have one tommorow. Don't worry if you need to prompt me as I have so many parts flying about at the mo! :banghead:

Many thanks but all sorted now, well almost, lol.